816


FOR LADEN CONTAINER HANDLING WITH STRADDLE CARRIERS
Drag right or left
Explore

Standard supply includes

  • Pick-up points to fit the yoke beam of the straddle carrier.
  • Four pendular ISO twistlocks.
  • Lifting eyes near twistlocks.
  • Hydraulic extension.
  • Hydraulically and mechanically controlled stop pins.
  • Solenoid valves for all hydraulic functions.
  • Electrical and mechanical twistlock protection and indications system.
  • Electric extension and retraction protection system.
  • Lift interrupt signal.
Download product file

ELME Spreader Model 816 is a telescopic top spreader for the handling of laden ISO containers. 816 is designed for use with straddle carriers.

The well-proven basic concept offers distinct advantages, such as two parallel telescopic beams, assuring max overlap. The beam sections are dimensioned to absorb not only the vertical, but also the very considerable horizontal forces.

TWISTLOCK SYSTEM
The twistlock system is manufactured in a rugged design and is well proven since many years. 816 is equipped with hardened ISO quick exchange twistlocks, hydraulically activated with electrical and mechanical interlocking against faulty locking and unlocking.

EXTENSION SYSTEM
Extension is powered by one hydraulic cylinder outside each beam.

CONTROL AND PROTECTION SYSTEM
Control voltage on the spreader is always converted to 24V DC for safety and reliability. Electrical systems monitor the state of the spreader at all times and gives signals when the spreader is correctly seated, locked or unlocked. Each signal is a precondition for the important protection functions of the spreader, such as twistlock activation, extension and retraction and lift interrupt.

DISCLAIMER
All specifications are subject to change without notice. A list of options enables you to adapt the product more precisely to your needs and further information is available on request.

Technical specifications

Type of application Straddle carrier
Type of lifting system Four vertical twistlocks
Spreader weight (TW) 7 300 kgs without extra equipment
Lifting capacity (SWL) 40 tonnes ± 10 % eccentric load
Lifting capacity (SWL), lifting eyes 4 x 10 tonnes
Twistlock ISO pendular 20 mm
Telescopic positions 20, 30 and 40ft
Telescoping speed 20-40ft < 20 sec. (calculated speed at 20° C)
Telescoping speed 40-20ft < 25 sec. (calculated speed at 20° C)
Hydraulics operating pressure up to 140 bar
Hydraulics flow 40-60 L/min
Electric - control voltage 24 VDC
Colour Signal yellow RAL 1003
Paint thickness 220 μ
Close
Close
Close