ELME Spreader Model 818 WTP is a telescopic top lift spreader for handling of laden ISO, WTP and US-domestic containers weighing up to 45 tonnes. 818 WTP is designed for use under a gantry at the front of a lift truck. The strong and basic concept offers distinct advantages, such as two parallel telescopic beams, assuring max overlap. The beam sections are dimensioned to absorb not only the vertical, but also the very considerable horizontal forces. TWISTLOCK SYSTEM The twistlock system is manufactured in a rugged design and is well-proven since many years. 818 WTP has hardened ISO quick exchange pendular twistlocks, hydraulically activated and mechanical interlocking against faulty locking and unlocking. GANTRY MOUNTING WITH MECHANICAL PILE SLOPE Gantry mounting is used for lift trucks, dedicated to container handling only. The system increases the residual capacity of the truck when compared to fork mounting, and is the more economical solution. Four telescopic hangers connect the spreader to the gantry. Gravity assures the level position of the spreader, with or without load. However, the hangers will allow the spreader to automatically adapt to containers on trailers or on uneven ground. TELESCOPING, SLEW, REACH AND SIDESHIFT SYSTEM Telescoping is powered by one hydraulic cylinder inside each beam. The slew and reach motions are possible thanks to two hydraulic cylinders that connect the spreader to the gantry. By powering either one or both cylinders, the slew and reach functions are activated. A third cylinder between spreader and gantry provides the sideshift motion. WTP-SYSTEM The WTP option built into the spreader endbeams allows the operator to hydraulically change the twistlock positions to handle ISO and US-domestic containers as well as WTP containers. CONTROL AND PROTECTION SYSTEM Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important protection functions of the spreader, such as twistlock activation, telescoping and lift interrupt. DISCLAIMER All specifications are subject to change without notice. A list of options enables you to adapt the product more precisely to your needs and further information is available on request.