8510


FOR LADEN CONTAINER AND TRAILER HANDLING WITH RAIL MOUNTED OR RUBBER TYRED GANTRY CRANES
Drag right or left
Explore

Standard supply includes

  • Mounting arrangement to fit crane.
  • Four vertical pendular ISO twistlocks.
  • Lifting eyes near twistlocks.
  • Hydraulic telescoping.
  • Hydraulic leg folding.
  • Hydraulic clamp and unclamp.
  • Solenoid valves for all hydraulic functions.
  • Four foldable piggyback legs in an automatic sequence with block stacking.
  • Electrical and mechanical twistlock protection and indication system.
  • Electric extension and retraction protection system.
  • Electrical protection indication system for trailer handling.
  • Lift interrupt signal.
  • LED-indication lights.
Download product file

Spreader Model 8510 is a telescopic piggy back spreader for intermodal handling of laden ISO containers and trailers up to 41 tonnes. 8510 is designed for mounting on Rail Mounted (RMG) or Rubber Tyred Gantry (RTG) cranes.

The strong and basic concept offers advantages, such as two parallel telescopic beams, assuring max overlap. Beam sections are dimensioned to absorb not only the vertical, but also the very considerable horizontal forces.

TWISTLOCK SYSTEM
The twistlock system is manufactured in a rugged design and is well-proven since many years. 8510 has hardened, pendulling ISO quick exchange twistlocks, hydraulically activated with electrical and mechanical interlocking against faulty locking and unlocking.

EXTENSION AND HYDRAULIC SYSTEM
Extension is powered by one hydraulic cylinder inside each beam. Double electric motor- and pump assemblies assure simultaneous telescoping of both beams. Spreader can be operated with one electric motor and pump.

PIGGYBACK LEGS SYSTEM
The leg arrangement is done according to the ELME design system which is a load clamping system that involves all four foldable piggyback legs in an automatic sequence. Thanks to this feature the spreader can be lowered between containers that are block stacked front to front and side to side.

The feet are designed according to European standard and made of Strenx® 900E material (meets S 890 QL) to extend life time. Sensors (integrated in the feet) detect when the trailer is clamped and send signals to the indication system. To avoid unclamping, a signal is also sent as soon as the container/trailer is lifted off the ground.

CONTROL AND PROTECTION SYSTEM
Control voltage on the spreader is always converted to 24V DC for safety and reliability. Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important protection functions of the spreader, such as twistlock activation, telescoping and lift interrupt.

DISCLAIMER
All specifications are subject to change without notice. A list of options enables you to adapt the spreader more precisely to your needs and further information is available on request.

Type of application RTG, RMG
Type of lifting system Four twistlocks or four piggyback legs
Type of stacking Stacking and block stacking
Spreader weight (TW) 11 000 kg without extra equipment
Lifting capacity (SWL) 41 tonnes ± 10 % eccentric load
Lifting capacity (SWL), piggyback 41 tonnes ± 10 % eccentric load
Lifting capacity (SWL), lifting eyes 4 x 10 tonnes
Twistlock ISO pendular 20 mm
Telescopic positions 20, 30, and 40ft, B7
Telescoping speed 20-40ft < 25 sec. (calculated speed at 20° C)
Legs clamping distance, min 1,766 ± 60 mm
Legs clamping distance, max 3,195 ± 60 mm
Legs centre distance 4,876 mm
Legs, down time < 29 sec. (calculated speed at 20° C)
Legs, up time < 25 sec. (calculated speed at 20° C)
Hydraulics, operating pressure up to 140 bar
Hydraulics, flow 46 L/min (2x23)
Hydraulics, tank volume 90 L
Power supply 400 VAC/50 Hz
Electrical motors 2 x 4 kW
Electric - control voltage 24 VDC
Colour Signal yellow RAL 1003
Paint thickness 200 μ
Close
Close
Close